Door Bins; Adjustable Utility Compartment & Tray; Flip-Up Door Shelf; Ice Maker Operation - Kenmore 106 Series Use & Care Manual

Door Bins

(on some models)
The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired
support button and push down until it stops.
Adjustable Utility
Compartment & Tray
(on some models)
The utility compartment and tray slide from one side to the
other for more flexible storage. The tray fits on either side
of the utility compartment or partially underneath it. Try
moving it into different places to find the option that works
best for you.
To install the utility compartment and tray:
1. Insert the front of the utility tray into the slot on the
back of the shelf rail. Lower the back of the tray into
position.
2. Place the front of the utility compartment on top of the
shelf rail. Lower the back of the compartment onto the
ribs on the refrigerator door.
To adjust the utility compartment or tray:
1. Lift the front slightly.
2. Slide to desired position.
3. Lower front to lock into place.

Flip-up Door Shelf

(on some models)
The shelf bottom flips up so you can store taller items in
the door shelf below. When in the down position, the shelf
is strong enough to hold up to 10 pounds (4.5 kg).

Ice Maker Operation

(on some models)
After the freezer section reaches normal freezer
temperature, the ice maker fills with water and begins
forming ice. Allow 24 hours to produce the first batch of
ice. Ice maker should then produce approximately 7 to 9
batches of ice in a 24-hour period. Discard the first three
batches of ice produced to avoid impurities that may be
flushed out of the system.
After ice is made, the ice cubes drop into the storage bin.
When ice storage bin is full, ice maker arm raises to the
"OFF" position (arm up). If ice is not needed, you can stop
the ice maker by raising the arm to the "OFF" position (arm
up). Listen for a click sound to be sure that the ice maker
will not continue to operate.
To start ice maker, lower arm to the "ON" position (arm
down). Do not force arm up or down. Do not store anything
on top of the ice maker or in the ice storage bin.
The ON/OFF lever for the ice maker is a wire signal arm
located on the side of the ice maker. Push the arm
down to start making ice automatically, and push it up
to shut off the ice maker.
17