Pantry Drawer Cover - Kenmore STEP UP Service Manual

11. Disassemble/Assemble Procedures
11-6. Pantry Drawer Cover and Cover Multi-duct Assembly
Step
1
2
Lift up the cover and pull it out a little to remove the
connector from back wall.
3
Remove two caps with a thin flat tool.
4
□ Remark :
• Do not use the small screw in the upper side of Multi-duct Assembly. The screw could be loose.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove vegetable cases,
vegetable cover, pantry
drawer. Loosen two screws
from water tank assembly.
Loosen the upper
screw(big one;
outside diameter of
thread 5mm) and
lower screw(small
one; outside diameter
of thread 4mm)
※ Follow the reverse order when assembling.
Step
5
6
Description
Hold the top side of
the Cover Multi-duct
and then pull it to
release hooks.
Disconnect two sensor
connectors and two
damper Connectors
from back wall.
59 / 79