Freezer Louver Ass'y - Kenmore STEP UP Service Manual

11. Disassemble/Assemble Procedures
11-9. Freezer Louver Assembly
Step
1
Remove freezer drawers.
2
Press the left fixing hook of the rail system.
Holding the top of the F door, pull it out a little to
release. Repeat release the right hook as same way.
And then fully open the door to remove.
3
Remove two screws.
4
Holding the left side of Louver, pull it forward.
Be careful no to damage the wires in the right side.
□ Remark :
• After installing the f door, fully push and close it to align left and right rack gear tooth. And check locking rail system.
• If necessary, assemble one Gear F Rail *M in the rail system. Push and assemble another one Gear Rail F *M on
opposite side of rail.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
※ Follow the reverse order when assembling.
Step
5
Disconnect the connectors of F fan motor and F
sensor.
Description
Fixture F Rail *M
(Material : steel bar)
Gear F rail *M
(Material : plastic)
Supporter F Rail
Gear *M
(Material : plastic)
Rail System
62 / 79