Kenmore STEP UP Service Manual page 71

11. Disassemble/Assemble Procedures
11-18. Dispenser Lever
Step
1
2
3
4
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove the Front
Control Panel.
Loosen 4 screws to
remove the Box
Dispenser Ice
Shutter Assembly.
Pull and remove the
assembly.
Remember how to arrange the
dispenser water tube.
See the yellow tape for guide line.
Separate the water tube which is
assembled to hook and cylinder.
Disconnect 5
connectors.
※ Follow the reverse order when assembling.
Step
5
Remember how to link the dispenser flap moving
motor and the Box Dispenser Ice shut Assembly.
Loosen a screw to remove the motor.
6
Release the hook and remove the
water dispenser lever switch.
7
Description
Loosen 2 screws and the
lever kit with the switch.
71 / 79