Table of Contents
Advertisement
11. Disassemble/Assemble Procedures
11-19. Mullion Bar Assembly
Step
1
Loosen 2 screws.
Grip the upper and lower side of the bar.
Push it up to remove.
2
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Disconnect the mullion bar
heater(AC) connector.
※ Follow the reverse order when assembling.
※ Assemble Procedures
at Middle Hinge Part
Align the 2 screw holes on
the door with the mounting
holes on the middle hinge of
mullion bar after fitting two
hooks certainly.
And then tighten 2 screws.
72 / 79
Hide quick links:
Advertisement
Table of Contents
