Table of Contents
Advertisement
11. Disassemble/Assemble Procedures
11-7. Refrigerator Sensor, Pantry Drawer Sensor, Dampers in Cover Multi-duct Assembly
Step
1
Separate the insulator from the multi-duct cover.
2
Remove R sensor on the upper side of
cover. Remove the pantry drawer sensor
on the lower side of cover.
3
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Take off the tape and
separate insulator covered
pantry drawer damper. And
remove the damper.
Before disassembly check
the arrangement of wires
and connector.
※ Follow the reverse order when assembling.
M-PCB
60 / 79
Hide quick links:
Advertisement
Table of Contents
