Description Of Function & Circuit Of Micom; Function - Kenmore 795.70332.410 Service Manual

https://appliancetechmanuals.com
14. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM

14-1 FUNCTION

14-1-1 Function
1. When the appliance is plugged in, it is set to 37°F for Refrigerator and 0°F for freezer.
You can adjust the Refrigerator and the Freezer control temperature by pressing the ADJUST button.
2. When the power is initially applied or restored after a power failure, it is set to Control temperature Previously.
3. If you do not press any button after turning on the power, only the water, Ice type, lock Icon that has been selected will
be turned on and all other LEDs on the Dispenser Panel will be turned off Within 60 seconds. (Power Save Mode)
4. If you press a button, only the water, Ice type, lock Icon that has been selected will be turned on and all other LEDs on
the Dispenser Panel will be turned off Within 20 seconds. (Power Save Mode)
14-1-2 How to Toggle the Display between °F & °C
1. The initial setting is °F and the display temperature mode can be changed from °F to °C or °C to °F by pressing and
holding the FRZ TEMP and the REF TEMP keys at the same time for over 5 seconds.
14-1-3 Alarm/Lock function (dispenser and display button lock)
1. When the refrigerator is first turned on, the buttons are not locked.
"LOCK" is deactivated with light off.
2. To lock the display, the dispenser, and the control panel, press
and hold the LOCK button for 3 seconds. "LOCK" is activated with light
on.
3. The LOCK button is the only control feature that remains active
in the locked state. The buzzer sound, other control buttons,
and the dispenser are deactivated.
4. To release from the locked state, press and hold the LOCK
button again for 3 seconds.
5. If you don' t hold the Alarm/Lock button more than 3 seconds,
Alarm function will be changed and alarm for opened door will be on/off
same as alarm icon indicating.
14-1-4 Filter condition display function
1. There is a replacement indicator light for the filter
cartridge on the dispenser.
2. Water filter needs replacement once six months or of
using water filter.
3. When the Water Filter Icon lights on, you must exchange
the filter.
4. After replacing the filter, press and hold the lock
button for more than 3 seconds .
After then water Filter icon turn off with reset status.
Ex) In selecting
"LOCK"
In initial Power On
Classification
/ Filter RESET
Filter Status
Display
- 75 -
Ex) In selecting
"LOCK" again
On