Adjusting The Open And Close Stop Limits For The Sunsetter Motorized Awning; How To Use The Multi Channel Remote Transmitter - SunSetter OASIS Owner's Manual & Assembly Instructions

ADJUSTING THE OPEN AND CLOSE STOP LIMITS
Close
my/Stop
Open
Channel
Indicator
Lights
Channel Selector Button

How to Use the Multi Channel Remote Transmitter

• Your OASIS is programmed to Operate on Channel 1 of
the Multi Channel Remote Transmitter.
• Channel 1 is the first channel on the left.
• To identify the active Channel, press and release the
Channel Selector button.
The active Channel Indicator Light will blink for about
5 seconds.
• To move to the next Channel, press and release the
Channel Selector button while the Channel Indicator
Light blinks.
The next Channel becomes active.
That Channel Indicator Light blinks for about 5 seconds.
• All four blinking Lights indicates Channel 5 is active.
• Channel selection moves in order from Channel 1
through 5, then back to 1.
FOR THE SUNSETTER MOTORIZED AWNING
TO CHANGE THE OPEN LIMIT:
1. Open the Awning to its current Open position and let it stop on its own.
2. Press and Hold the OPEN
Awning moves a little bit, or jogs back and forth, then release the buttons.
3. Adjust the Awning to the new Open limit position (the Awning moves only
while pressing the OPEN
4. Press and Hold the "my"
back and forth, then release the "my"
5. Check the new Open limit.
TO CHANGE THE CLOSED LIMIT:
1. Close the awning to its current Closed position and let it stop on its own.
2. Press and Hold the OPEN
Awning moves a little bit, or jogs back and forth, then release the buttons.
3. Adjust the Awning to the new Closed position (the Awning moves only while
pressing the OPEN
4. Press and Hold the "my"
back and forth, then release the "my"
5. Check the new Closed limit.
APPENDIX A
and CLOSE
or CLOSE
button until the Awning moves a little bit, or jogs
and CLOSE
or CLOSE button).
button until the Awning moves a little bit, or jogs
13
buttons simultaneously until the
button).
button.
buttons simultaneously until the
button.
Channel Indicator Lights
Channel Selector Button