ABB SensyMaster FMT430 Operating Instructions Manual page 121

SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B
Menu / parameter
Communication / ...Profibus
Address
Ident Nr. Selector
Comm State
Baud Rate
PB Manufacturer ID
Description
Set the PROFIBUS DP® device address (1 to 126).
Display the PROFIBUS DP® identification number
• 0x9740 -PA 1AI+1TOT
• 0x3435 -ID Specific
• Adaptation Mode
• 0x9700 -PA 1AI
Display the PROFIBUS communication status.
• Offline: No PROFIBUS® communication.
• Stop: Bus active, device not active.
• Clear: Device is being initialized.
• Operate: Cyclic communication is active.
Display the transmission speed (baud rate) for the PROFIBUS® communication.
The baud rate is automatically detected and does not need to be configured manually.
Display the PROFIBUS DP® manufacturer ID
• 26: ABB
121