ABB SensyMaster FMT430 Operating Instructions Manual page 78

78 SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B
... 8 Commissioning
... Parameterization via the menu function Easy Setup
Easy Setup
Freq.Out 51/52
Mass Flow [%]
Next
40. Use to call up the edit mode.
41. Using / , select the desired process value for
frequency output 51 / 52.
42. Confirm the selection with
Easy Setup
Freq.Out 51/52 100%
10000 Hz
Next
43. Use to call up the edit mode.
44. Using / set the frequency for 100 % of the flow rate.
45. Confirm the selection with
Easy Setup
Freq.Out 51/52 0%
0 Hz
Next
46. Use to call up the edit mode.
47. Using / set the frequency for 0 % of the flow rate.
48. Confirm the selection with
Easy Setup
Binary Out 51/52
Alarm
Next
49. Use to call up the edit mode.
50. Using / , select the desired function for binary output
51 / 52.
51. Confirm the selection with
Only available if "Dig.Out 51/52 Mode"
Frequency has been selected.
Edit
.
Only available if "Dig.Out 51/52 Mode"
Frequency has been selected.
Edit
.
Only available if "Dig.Out 51/52 Mode"
Frequency has been selected.
Edit
.
Only available if "Dig.Out 51/52 Mode"
Binary has been selected.
Edit
.
Easy Setup
Dig.Out V1/V2 Mode
Dig.Out V3/V4 Mode
Off
Next
52. Use to call up the edit mode.
53. Use / to select the desired operating mode (Off,
Binary) for digital output V1 / V2 or V3 / V4.
54. Confirm the selection with
Easy Setup
Dig.Out V1/V2
Dig.Out V3/V4
Alarm
Next
55. Use to call up the edit mode.
56. Use / to select the desired function for binary output
V1 / V2 or V3 / V4.
57. Confirm the selection with
Select the application
Easy Setup
...Application Selector
Next
58. Use to call up the edit mode.
59. Use / to select the desired application.
60. Confirm the selection with
Only if an appropriate plug-in card is
present!
Edit
.
Only if for Dig.Out V1/V2 Mode or
Dig.Out V3/V4 Mode Binary has been
selected and an appropriate plug-in
card is present!
Edit
.
Edit
.