ABB SensyMaster FMT430 Operating Instructions Manual page 109

SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B
Menu / parameter
Device Setup / ...Transmitter
...Units
...Custom Units
TX Location TAG
TX TAG
Perform Device Reset
Factory Defaults
...Feature Settings
Device Setup / ...Transmitter / ...Units
Unit Massflow Qm
Mass Totalizer
Unit Volumeflow Qv@
Unit Vol.@ totalizer
Std. Conditions Vol@
Special Cond. fact.
Volumeflow Qv@ Name
Volume@ Tot. Name
Temperature
Pressure
Length
Density@
Density@ Name
Description
Selection of submenu '...Units' using
Selection of submenu '...Custom Units' using
Enter the measuring point tagging for the transmitter.
Alphanumeric, max. 20 characters
Entry of the TAG number for the transmitter.
Alphanumeric, max. 20 characters
For service purposes only.
Restart the device without having to switch the power supply on and off.
All user-accessible parameters will be reset to the factory default settings.
Selection of submenu '...Feature Settings' using
Selection of unit for mass flow.
Refer to Table 2: Units for the mass flow on page 96.
The selection applies to the display of the current mass flow, and for the parameters related to mass flow such as Qm
and Qm DN.
Max
Select the unit for the mass totalizer.
Refer to Table 7: Units for the mass totalizer on page 96.
Selection of unit for the standard volume flow.
Refer to Table 1: Units for the standard volume flow on page 96.
The selection applies to the display of the current standard volume flow and for the parameters related to standard volume
flow such as Qv@ Max and Qv@ Max. DN.
Select the unit for the standard volume totalizer.
Refer to Table 8: Units for the standard volume totalizer on page 97.
Selection of the standard state for standard volume flow.
Refer to Table 4: Standard conditions on page 96.
Enter the factor by which the standard state 0°C 1atm is multiplied to define an individual standard state.
Enter the name of the unit for the standard volume flow.
If the first character is a space, a @ sign will be appended to the unit (standard setting).
Alphanumeric, maximum 7 characters.
Enter the name of the unit for the standard volume totalizer.
If the first character is a space, a @ sign will be appended to the unit (standard setting).
Alphanumeric, maximum 7 characters.
Selection of unit for temperature.
Refer to Table 5: Temperature units on page 96.
Select a unit for pressure.
Refer to Table 9: Pressure units on page 97.
Select a unit for length information.
Refer to Table 6: Length units on page 96.
Select a unit for standard density.
Refer to Table 3: Standard density units on page 96.
Enter the name of the unit for standard density.
If the first character is a space, a @ sign will be appended to the unit (standard setting).
Alphanumeric, maximum 7 characters.
.
.
.
109
Max