Machine Dimension; Getting To Know Your Machine - Promac SY-350V Operating Instructions Manual

4. Machine dimensions, Transport, Installation and
Dismantling
4.1 Machine dimensions
4.2 Transporting the machine
When transporting in its own packaging, use a forklift
truck or hand trolley.
4.3 Technical characteristics
Cutting Capacity
0° 85mm 120mm
45° 75mm 100mm
Main motor
Spindle speed
Vise opening max.
Cooling pump
105 x 105mm 160 x
90mm
85 x 85mm 85 x
70mm
3HP / 4 pole
24 – 120 rpm
170mm
1/8 HP
Coolant tank
Machine weight (with stand)
Machine dimensions (with stand) 1200x990x1720mm
Stand dimensions
11.2 Noise emission
Acoustic pressure level (EN 11202):
Idling
Operating
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.

5. Getting to know your machine

5.1 Disk head assembly
The section of the machine composed motor, gear transfer
system, disc or blade, and control handle.
A: Control Lever
A long angled lever with a handle grip and trigger switch for
starting, raising, and lowering the disk head
B: Transfer Case
The central part of the assembly, housing the gear system
and oil tank.
5.2 Machine base
A heavy cast iron structure that supports the miter system,
vise system, and head assembly.
5
5 l
250 kg
600x580x720mm
Lpa 71,0 dB(A)
Lpa 83,8 dB(A)