Getting Started - Promac SY-350V Operating Instructions Manual

5.3 Vice
A clamping system that provides the basic support and
security for the work material. Operations are conducted
by hand-wheel, which opens and closes the vise jaws.
The clamping vise can be adjusted forward and backward
to clamp workpiece of various sizes.
5.4 Support roller
A device that support longer sized material. The roller
assists stock moving through the vise.
5.5 Stand
Support structure for the Machine Head Assembly,
Machine Base, and Vise system. The stand also stores
electrical control box at the front and coolant pump at rear.
5.6 Coolant pump
Found within the machine stand, the coolant pump is a self
contained system that includes a tank, pump motor, filters
and hoses.

6. Getting started

Make sure that the electrical supply and the machine's
voltage are the same. Refer to the identification plate on the
motor for the correct voltage.
Use a good quality grounded electrical system.
All internal and/or internal operations, maintenance or repairs,
must be performed in a well-lit area or where there is
sufficient light from extra sources so as to avoid the risk of
even slight accidents.
6.1 Minimum requirements for housing the machine
- The main voltage and frequency complying with the
requirements for the machine's motor.
- Environment temperature from –10°C to +50°C.
- Relative humidity not over 90%.
6