Raid Controller Card; Network; Flexio Cards - Huawei FusionServer Pro 2288H V5 Technical Manual

Huawei FusionServer Pro 2288H V5 Server
Technical White Paper
●

5.5.4 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.
●
●

5.6 Network

5.6.1 FlexIO Cards

FlexIO cards provide network expansion capabilities.
●
Issue 12 (2020-04-20)
Activity
Indicator
(Green)
Off
Steady on/Off
If the VMD function is disabled, NVMe drives support only orderly hot swap.
Table 5-11 NVMe drive indicators (VMD disabled)
Activity
Indicator
(Green)
Off
Steady on
Blinking at 2 Hz
Off
Off
Steady on/Off
Contact your local Huawei sales representative or use the
Computing Compatibility Checker
For details about the RAID controller card, see
Controller Card User
The FlexIO card (with electrical ports) cannot be connected to power over
Ethernet (PoE) devices (such as a switch with PoE enabled). Otherwise, link
communication failure or even damage to the FlexIO card may be caused.
Copyright © Huawei Technologies Co., Ltd.
Fault Indicator Description
(Yellow)
Blinking at 8 Hz The data on the secondary NVMe
drive is being rebuilt.
Steady on The NVMe drive is faulty.
Fault Indicator Description
(Yellow)
Off The NVMe drive cannot be detected.
Off The NVMe drive is working properly.
Off Data is being read from or written
to the NVMe drive.
Blinking at 2 Hz The NVMe drive is being located or
hot-swapped.
Blinking at 0.5 The hot removal process is
Hz complete, and the NVMe drive is
removable.
Steady on The NVMe drive is faulty.
to determine the components to be used.
Guide.
5 Hardware Description
Intelligent
Huawei V5 Server RAID
44