Units (Imperial, Us Or Metric) - Triumph Street Triple S 660 cc Owner's Handbook Manual

Changing the Set Engine Speed
To change the engine speed setting:
• Press the
individual press of the SCROLL
button will increase the setting
in increments of 500 rpm, up to
the maximum rpm limit. When the
maximum rpm limit is reached, the
setting will return to 3,500 rpm.
• When the correct setting is shown,
press the SET button to confirm
the setting, SHIFt will be shown in
the display screen and all the gear
change lights will flash.
• Press and
button until REtURn is shown in the
display screen then press the SET
button.
Setting the Gear Change Lights to Off
3
1
4
1. Gear change lights
2. Display screen (OFF mode shown)
3. SCROLL Button
4. SET Button
To turn the gear change lights to OFF:
• Press and
button until OFF is shown then
press the SET button.
scroll button.
release the SCROLL
2
release the SELECT
General Information
• Press the SET button and SHIFt will
be shown in the display screen.
• Press
Each
button until REtURn is shown in the
display screen then press the SET
button.

UnitS (Imperial, US or Metric)

Units has four selectable display modes.
Each display provides the following
information:
mpg (Imperial gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in litres of fuel per
100 km.
km/L (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in kilometres per litre
of fuel.
and release the SCROLL
87