Triumph Street Triple S 660 cc Owner's Handbook Manual page 59

There are two options:
• RESET NOW AND CONTINUE - Resets
all trip meter data in the relevant
trip meter.
• CONTINUE WITHOUT RESET - Any
trip meter data in the relevant trip
meter will not be reset.
Trip Set Up - Automatic Reset
To set the
automatically reset:
• From the TRIP SETUP menu, push
the joystick down/up and then
press the joystick centre to select
TRIP 1 RESET or TRIP 2 RESET.
• Push the joystick down/up to select
AUTOMATIC and then press the
joystick centre to confirm.
• Using the joystick down/up, choose
the timer setting and press the
joystick centre
required time limit.
• The required time limit is then
stored in the trip memory. A tick
is shown to indicate the selected
option.
• When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
trip computer
to confirm
General Information
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off
10:30 hrs
18:00 hrs
to
Trip 2 Enable/Disable
Trip 2 meter can be enabled or disabled.
If trip 2 meter is disabled, it will no
longer be shown in the information tray.
the
To enable or disable the Trip 2 meter:
• From the TRIP SET UP menu, push
the joystick down/up to scroll to the
TRIP 2 DISPLAY. Press the joystick
centre to confirm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
Press the joystick centre to confirm.
A tick is shown to indicate the
selected option.
Trip Meter
Selected
Resets to
Time Delay
Zero
4 HRS 14:30 hrs
10:00 hrs
16 HRS
(next day)
59