Setting the RIDER Mode Options
Note
During setup, TC can be activated or de-
activated in the RIDER mode.
If the RIDER mode is currently selected,
changes to the MAP, ABS and TC
systems will become immediately active.
If the ROAD or TRACK modes are
selected the RIDER settings will not
become active until the RIDER mode is
selected (see page 90).
To set the RIDER mode options; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
•
Press and release the MODE button
on the left handlebar switch housing
until RIDER mode is selected.
•
Press and hold the MODE button
until MAP is shown in the display
screen.
or alternatively:
•
Press
and
button until SEtUP is shown in the
display screen. Press the SET button
to confirm.
release
the
SCROLL
General Information
•
Press
and
button until RIdER is shown in the
lower instrument display, then press
the SET button to confirm.
RIdER Shown
release
the
SCROLL
93