Maintenance
Rear Suspension Spring Preload
Adjustment
Street Triple S (660 cc)
The spring preload adjuster is located at
the top of the rear suspension unit.
2
cjxi
1.
Peg
2.
Position 1 (minimum adjustment)
3.
Adjustment tool
To change the spring preload setting:
•
Insert the adjustment tool supplied
in the tool kit into the slot in the
adjuster ring.
•
Turn the adjuster ring anticlockwise
to increase spring preload, and
clockwise
to
preload.
•
When delivered from the factory,
the spring preload adjuster will be
set to the Solo Riding position as
shown in the suggested suspension
settings table.
•
Adjuster
settings
from position one with position one
being with the adjuster turned fully
clockwise. Position one gives the
minimum amount of spring preload.
170
1
3
decrease
spring
are
counted
Rear Suspension Rebound Damping
Adjustment
Street Triple R
The
rebound
damping
located at the bottom of the rear
suspension unit on the left hand side of
the motorcycle.
1
cjye
1.
Slotted adjuster
To change the rebound damping setting:
•
Rotate
the
clockwise
to
damping
and
decrease.
adjuster
slotted
adjuster
increase
rebound
anticlockwise
is
to