Triumph Shift Assist (Tsa) (If Fitted) - Triumph Street Triple S 660 cc Owner's Handbook Manual

How to Ride the Motorcycle
Triumph Shift Assist (TSA)
(if fitted)
In the event of a TSA system fault
when riding, the TSA system will be
disabled.
Use the clutch to change gears in the
normal way otherwise damage to the
engine or gear box may occur.
Contact a Triumph dealer as soon as
possible to have the fault checked and
rectified.
Changing gears must be completed
with a quick
movement, making sure that the pedal
moves through its full range of travel.
Always take care when changing
gears. After a gear change, the pedal
must be fully released before another
gear change can be made.
Incorrect gear
cause damage to the engine and
transmission.
Triumph Shift Assist (TSA) adjusts the
engine torque to allow gears to engage,
without closure of the throttle twist grip
or operation of the clutch.
TSA is not an automatic system for
changing gears. Gears must be selected
and changed in the normal way using
the gear pedal as described on page 119.
120
Caution
Caution
and forceful pedal
changes
TSA works for both up shifts and down
shifts of gear. The clutch must be used
for stopping and pulling away. The
clutch must be used when selecting
any gear from neutral, and also when
selecting neutral from any other gear.
Triumph Shift Assist will not operate if:
• The clutch is applied.
• An up shift is attempted by mistake
when in 6th gear.
• A down shift is attempted by
mistake when in 1st gear.
• An up shift is attempted at very low
engine speeds.
• A down shift is attempted at very
high engine speeds.
• An up shift is attempted during
overrun.
• The vehicle speed limiter is active.
• Cruise control is active.
• Traction control is operating.
• If the previous gear has not fully
engaged.
• The throttle is changed during a
shift.
can
If TSA does not operate, the clutch can
be used to change gears in the normal
way.
For more information on enabling and
disabling the TSA functionality, see
page 56.