Battery Installation; Fuses - Triumph Street Triple S 660 cc Owner's Handbook Manual

Maintenance

Battery Installation

Warning
Make sure that the battery terminals
do not touch the motorcycle frame.
This may cause a short circuit or spark
which would ignite battery gases
causing a risk of personal injury.
1
cjws
1. Battery
2. Positive (red) terminal
3. Negative (black) terminal
4. Battery strap
To install the battery:
• Position the battery into its housing.
• Reconnect the battery, positive (red)
lead first and then the negative
lead.
• Tighten the battery terminals to
4.5 Nm.
• Apply a light coat of grease to the
terminals to prevent corrosion.
• Cover the positive terminal with the
protective cap.
• Refit the battery strap.
• Refit the rider and passenger seat.
182

Fuses

Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
2
4
Note
A blown fuse is indicated when all of the
systems protected by that fuse become
inoperative. When checking for a blown
fuse, use the tables to establish which
fuse has blown.
3
The fuse boxes are located underneath
the rider's seat. To allow access to the
fuse boxes, the rider's seat must be
removed (see page 109).
cjwu
1.
2.
Warning
Fuse box
Main fuse (30 Amp)
1
2