Daily Safety Checks - Triumph Street Triple S 660 cc Owner's Handbook Manual

General Information

Daily Safety Checks

Failure to perform
every day before you ride may result
in serious motorcycle damage or an
accident causing serious injury or
death.
Check the following items each day
before you ride. The time required is
minimal, and these checks will help
ensure a safe, reliable ride.
If any irregularities are found during
these checks, refer to the Maintenance
and Adjustment section or see your
authorised Triumph dealer for the action
required to return the motorcycle to a
safe operating condition.
Check the following:
Fuel: Adequate supply in tank, no fuel
leaks (page 100).
Engine Oil: Correct level on dipstick. Add
correct specification oil as required.
No leaks from the engine or oil cooler
(page 140).
Drive Chain:
(page 150).
Tyres/Wheels:
pressures (when cold). Tread depth/
wear, tyre/wheel damage, punctures
etc. (page 173).
114
Warning
these checks
Correct adjustment
Correct inflation
Nuts, Bolts,
check that steering and suspension
components, axles, and all controls are
properly tightened or fastened. Inspect
all areas for loose/damaged fixings.
Steering Action: Smooth but not loose
from lock to lock. No binding of any of
the control cables (page 162).
Brakes: Pull the brake lever and push
the brake pedal to check for correct
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (page 153).
Front Brake Pads: Check that the
correct amount of friction material
is remaining on all the brake pads
(page 153).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (page 157).
Front Forks: Smooth action. No leaks
from fork seals (page 163).
Throttle: Make sure that the throttle
grip returns to the idle position without
sticking (page 26).
Clutch: Smooth operation and correct
cable free play (page 148).
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (page 144).
Electrical Equipment: All lights and the
horn function correctly (page 183).
Engine Stop: Stop switch turns the
engine off (page 116).
Stand: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (page 107).
Fasteners:
Visually