•
If correct adjustment cannot be
made using the lever adjuster, use
the cable adjuster at the lower end
of the cable.
cjxg
1.
Adjuster locknuts
2.
Clutch outer cable
•
Loosen the adjuster locknut.
•
Turn the outer cable adjuster to give
2 - 3 mm of free play at the clutch
lever.
•
Tighten the locknut to 3.5 Nm.
Drive Chain
A loose or worn chain, or a chain that
breaks or jumps off the sprockets
could catch on the engine sprocket or
1
lock the rear wheel.
2
A chain that snags on the engine
sprocket will injure the rider and lead
to loss of motorcycle control and an
accident.
Similarly, locking the rear wheel will
lead to loss of motorcycle control and
an accident.
For safety and to prevent excessive
wear the drive chain must be checked,
adjusted and lubricated in accordance
with
requirements. Checking, adjustment and
lubrication must be carried out more
frequently for extreme conditions such
as high speed riding, salty or heavily
gritted roads.
If the chain is badly worn or incorrectly
adjusted (either too loose or too tight)
the chain could jump off the sprockets
or break. Therefore, always replace
worn or damaged chains using genuine
Triumph parts supplied by an authorised
Triumph dealer.
Maintenance
Warning
the
scheduled
maintenance
149