Triumph Street Triple S 660 cc Owner's Handbook Manual page 99

In the event of an incomplete riding
mode change:
• Safely bring the motorcycle to a
stop.
• Select Neutral.
• Turn the ignition OFF and then back
ON again.
• Select the required riding mode.
• Restart the engine and continue
riding.
Warning
Do not stop the engine using the
ignition switch or engine stop switch
whilst the motorcycle is moving.
Always bring the motorcycle to a stop
safely and engage Neutral gear prior
to stopping the engine.
Stopping the engine by turning off the
ignition or engine stop switch whilst
the motorcycle is moving can lock the
rear wheel causing loss of motorcycle
control and an accident.
The engine should
stopped by turning the ignition switch
to the OFF position.
The engine stop
emergency use only.
Do not leave the ignition switched on
with the engine stopped. Electrical
damage may result.
Caution
normally
switch is
General Information
The engine should not be stopped
by turning the ignition switch to the
OFF position when the motorcycle is
moving. The engine stop switch is for
emergency use only.
Stopping
motorcycle
damage to motorcycle components.
Note
If the mode icons are not shown when
the ignition switch is in the ON position,
make sure that the engine stop switch
is in the RUN position.
be
for
Caution
the engine when
is moving may
the
cause
99