Table of Contents
Advertisement
ICO300-83B Series User's Manual
Step 4
Put the HDD bracket on the cover and use 4pcs screws to fix tightly. Taes the
HDD SATA+Power HDD cable and Cable Tie out from the accessory bag and
connect SATA+Power HDD cable to HDD then use Cable Tie to fix it on the
HDD bracket, cut off the lengthy Cable Tie.
Step 5
Connect SATA+Power HDD cable to the board connector, SATA side first then
power side second.
Step 6
Put the cover back to the system, and fasten screws tight close the chassis.
18
Hardware Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the ICO300-83B and is the answer not in the manual?