Fingerprint Reader Module - HP Spectre x360 14 Maintenance And Service Manual

3. Remove the keyboard (2).
Reverse this procedure to install the keyboard.

Fingerprint reader module

To remove the fingerprint reader module, use this procedure and illustration.
Table 5-13 Fingerprint reader module descriptions and part numbers
Description
In natural silver finish
In nightfall black finish
In Poseidon blue finish
NOTE: The fingerprint reader module spare part kit does not include the fingerprint reader module cable. The fingerprint reader module
cable is not available as a spare part component.
Before removing the fingerprint reader module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
1. Battery (see
2. System board (see
3. Keyboard (see
Remove the fingerprint reader module:
1. Remove the four Phillips M1.5 × 1.5 screws (1) that secure the fingerprint reader module to the top cover.
ENWW
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 38)
System board on page
Keyboard on page 55)
37), and then remove the following components:
46)
Component replacement procedures
Spare part number
M22189-001
M22188-001
M22190-001
37).
59