3.
Detach the touchpad cable (3) from the top cover and touchpad. (The touchpad cable is attached to the top
cover and touchpad with double-sided adhesive at two locations.)
4.
Remove the touchpad cable.
Reverse this procedure to install the touchpad cable.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-6
Touchpad descriptions and part numbers
Description
Touchpad:
In natural silver finish
In nightfall black finish
In Poseidon blue finish
NOTE:
The touchpad spare part kit does not include the touchpad cable. The touchpad cable is available using spare part number
M22152-001.
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the touchpad:
ENWW
(Preparation for disassembly on page
(Bottom cover on page
37).
Battery on page
38).
Spare part number
M22166-001
M22165-001
M22167-001
37).
Component replacement procedures
45