Rear Speakers - HP Spectre x360 14 Maintenance And Service Manual

1. Remove the Phillips M2.0 × 1.8 broad head screw (1) that secures the connector board to the top cover.
2. Remove the connector board (2) and cable.
Reverse this procedure to install the connector board.

Rear speakers

To remove the rear speakers, use this procedure and illustration.
Table 5-10 Rear speakers description and part number
Description
Rear speakers (includes rear left and right rear speakers, cables, and four rubber isolators)
Before removing the rear speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the system board (see
Remove the rear speakers:
1. Remove the two Phillips M2.0 × 2.0 screws (1) that secure the rear speakers to the top cover.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 37).
Battery on page 38).
System board on page
37).
46).
Spare part number
M22173-001
ENWW