Fingerprint Reader Module - HP ENVY x360 13 Maintenance And Service Manual

6. Remove the TouchPad (7).
Reverse this procedure to install the TouchPad and cable.

Fingerprint reader module

NOTE: The fingerprint reader module spare part kit includes the bracket but does not include the fingerprint
reader module cable. The fingerprint reader module cable is available using spare part number L53428-001.
Description
In ceramic white finish
In nightfall black finish
Before removing the fingerprint reader module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the fingerprint reader module:
38 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 29).
28).
Spare part number
L57884-001
L53481-001