Troubleshooting - Gabarron RF Series Installation Instructions And User Manual

Thermal radiators
Table of Contents

Advertisement

Available languages

Available languages

5. TROUBLESHOOTING

- The thermal radiator does not heat.
- The room does not reach the right
temperature.
- DAY and NIGHT luminous indicators
are lit at the same time. Digital models: Continuous mode has been selected. Turn the knob to the "P"
- The display shows "Err1" or "Err2" Digital models: Contact the after sale service.
- Only daily programmes. The controller is in a single 24h mode (factory default). See WEEKLY
- The keyboard is locked. If the display shows
Check the heater or the air inlets are not covered.
Digital models: the display shows the time, press the  key to switch on the
heater. Check that the DAY or NIGHT temperatures are right.
Check the selected temperature is in accordance with the desired temperature.
Maybe the room needs more heating power.
position to return to the Program mode if required.
PROGRAMMES section to swift to 24h/7days mode.
press the  key more than six seconds.
the keyboard is locked. To unlock the keyboard
22

Advertisement

Table of Contents
loading

Table of Contents