Advertisement
5. - TROUBLESHOOTING
- The inertia radiator does not heat. Check the heater or the air inlets are not covered.
- The room does not reach the right
temperature.
- The display shows "Err1" or "Err2" Contact the after sale service.
- Only daily programmes.
- The keyboard is locked.
MODELS RX-ELST
R
heating element
Ts safety cut out
Tf
fan switch
C
selector
Rm fan resistor
Disconnect the heater from supply. Let the unit to cool
down and connect it again.
If the display shows the time press the
the heater. Check that the DAY or NIGHT temperatures
are right.
Check the selected temperature is in accordance with the
desired temperature. Maybe the room needs more
heating power.
The controller is in a single 24hr mode (factory default).
See WEEKLY PROGRAMMES section to swift to
24hr/7days mode.
If the display shows
unlock the keyboard press the
seconds.
WIRING
7
key to switch on
the keyboard is locked. To
key more than six
Advertisement
