Installation Instructions - Gabarron RF Series Installation Instructions And User Manual

MODELS
MODULES
W (cm)
D (cm)
H (cm)
WEIGHT (kg)
VOLTAGE
INPUT (W)

2. INSTALLATION INSTRUCTIONS

- Open the carton at the indicated side. The screws are in the accessories bag. Turn the carton upside down
to allow the heater to stand. Check that it is the correct model and that it is in good condition.
- To obtain optimum performances it is necessary to maintain a minimum clearance of 15 cm between the
radiator and any inflammable material as furniture, curtains etc. See figure.
Minimum15cm
Position and fix the brackets at the correct distance from the floor and hang the unit on the hooks of
the brackets. and mark the wall. Use the polystyrene packaging to level the heater and protect the floor.
- The studs and screws are in the accessories bag.
- Hung the unit on the hooks of the brackets.
- By turning the screw the metallic square will go downwards, retaining the heater. Repeat this on the
other bracket.
RF3P RF4P
RF3F RF4F
RF3E RF4E
3 4
33.5 41.5
10 plus 2 cm separated from the wall
7,5 9,5
375 500
Closest object
to the left end
Minimum 10cm
RF5P RF6P RF8P
RF5F RF6F RF8F
RF5E RF6E RF8E
5 6
49.5 57.5 73.5
58
11,5 13
220-240V~
625 750 1000
Shelf
Minimum 15cm
14
RF10P RF12P
RF10F RF12F
RF10E RF12E
8 10 12
89.5 105.5
17 20 23,5
1250 1500
Closest object
to the right end
Minimum 25cm
Use the heater as a template and mark
the fixing points on the wall using a
pencil through the two fixing holes in
the square brackets.
RF14P
RF14F
RF14E
14
121.5
27
2000