Electronic Control - Gabarron RF Series Installation Instructions And User Manual

3. USING THE THERMAL RADIATOR
Operation in electronic models is controlled by means of two rotary knobs.
It is possible to regulate the temperature level with accuracy by means of the temperature selector. The
heating indicator will be lit when the heater is consuming energy. When this dial is set in * position the heater
is in frost protection mode, at this stage if the room temperature drops below 3ºC the heater will connect
itself automatically.
There are three selectable positions with the mode selector dial:
Mode 0
Mode
selector dial.
Mode
the temperature selector dial.
SUN mode
indicator
MOON mode
indicator
Heating indicator
: The heater is switched off permanently. No frost protection mode here.
: SUN mode on, the heater maintains the set temperature with the temperature
: Moon mode on, the heater maintains a temperature 3ºC lower than the one set with
MODELS RF-P

ELECTRONIC CONTROL

15
Temperature
selector
Mode
selector