Preliminary Instructions - gefran GTF-Xtra Installation And Operation Manual

1.3 P
reliminary instruction
Read the following preliminary instructions before
installing and using the GTF modular power
controller.
This will make start-up faster and avoid some
problems that could be mistakenly interpreted as
malfunctions or limitations of the controller.
Immediately after unpacking the unit, check the order code
and the other data on the label attached to the outside of the
container.
Write them on the following table.
This data must always be available and given to Gefran
SN ............................... (Serial number)
CODE ......................... (Product code)
TYPE........................... (Order code)
SUPPLY...................... (Power Supply)
VERS. ......................... (Firmware version)
Customer Care representatives are available if technical service
is needed. Check that the controller is in perfect condition,
was not damaged during shipment, and that the package also
contains the "Configuration and Programming" manual.
Immediately report any errors, shortages, or signs of damage to
your Gefran dealer.
Check that the order code matches the configuration requested
for the intended application by consulting the section:
"Technical-Commercial Information."
Example: GTF 60 - 480 - 0 - 1 - 0 - M
Model
Nominal current
Nominal voltage
Control option, Absent
Diagnostic option: HB
Fuse: absent
Serial Modbus
80994B_MHW_GTF-Xtra_05-2016_ENG
See paragraph 2.1 " Dimensions and mounting" before installing
the GTF on the machine/host system control panel.
To configure the PC use the SW Gefran GF-Express kit and the
relative connection cable.
For the order code, see Section:
"Technical-Commercial Information".
Users and/or system integrators who want detailed
information on serial communication between
Gefran standard and/or industrial PCs and Gefran
Programmable Instruments can access Technical
Reference Documents on serial communication
and MODBus protocol, etc., in Adobe Acrobat
format on the Gefran website www.gefran.com:
• Serial Communication
• MODBus Protocol
Before calling Gefran Customer Care in case of assumed
malfunctions, please see the Troubleshooting Guide in the
"Maintenance" section and, if necessary, the F.A.Q. (Frequently
Asked Questions) section on the Gefran website
www.gefran.com
3