Liquiphant FTL51B
Endress+Hauser
4
Incoming acceptance and product
identification
4.1
Incoming acceptance
Check the following during goods acceptance:
Are the order codes on the delivery note and the product sticker identical?
Are the goods undamaged?
Do the nameplate data match the ordering information on the delivery note?
If required (see nameplate): Are the Safety Instructions, e. g. XA, provided?
Is the device properly secured?
If one of these conditions is not met, please contact the manufacturer' s sales office.
4.2
Product identification
The measuring device can be identified in the following ways:
• Nameplate data
• Extended order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All of the information on the measuring device is
displayed along with an overview of the scope of technical documentation provided
• Enter the serial number on the nameplate into the Endress+Hauser Operations App or
use the Endress+Hauser Operations App to scan the 2-D matrix code (QR Code) on the
nameplate
4.2.1
Nameplate
Order code:
Ext. ord. cd.:
Pmax:
0.83 W PNP
L:
Dev.Rev.:
FW:
1
2
4
Nameplate specifications
1
Manufacturer name and device name
2
Manufacturer address
3
Order number, external order code, serial number
4
Technical data
5
Approval-specific information
4.2.2
Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Address of the manufacturing plant: See nameplate.
Incoming acceptance and product identification
Ser. no.:
3
4
4
5
A0038187
9