Changing The Drives; Changing The Sewing Motor; Disassembling The Sewing Motor - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

14 Changing the drives

14.1 Changing the sewing motor

14.1.1 Disassembling the sewing motor

To disassemble the sewing motor:
1. Cut off the cable ties.
2. Disconnect the motor cable from the control.
3. Remove the toothed belt cover ( p. 19).
Fig. 50: Disassembling the sewing motor
(1) - Toothed belt
(2) - Plate with motor
(3) - Screws
4. Loosen the screws (5).
5. Remove the toothed belt (1).
6. Pull off the plate with the motor (2).
64
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before changing the drives.
①
②
③
Changing the drives
(4) - Toothed belt wheel
(5) - Screws
Service Instructions 911-210-10 - 00.0 - 06/2020
⑤
④
③