Cad Professional - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

Fig. 95: Performing an update of the control
(1) - USB port
3. Switch on the machine.
 The software update is performed automatically.
Information
If the automatic update does not function then you can use the menu items
Extras
and Update
to load a specific software version.
Contact the Dürkopp Adler Service Hotline for this.
Displaying software version information
The menu item
on the machine.
To display information on the software version currently used:
1. Press menu items
 The following information is displayed:
16.15 DA CAD professional
You can use the DA-CAD professional program to create seam programs
on a PC ( Operating Instructions DA CAD professional).
122
①
Service
> >
Update der (the) Steuerung (control)
>
displays information on the software currently installed
? > Press on
• Class
• Subclass
• Software version
• Date of creation of this software version
Initialisierung (Initialize)
Info .
Service Instructions 911-210-10 - 00.0 - 06/2020
Programming