Working Basis; Order Of The Adjustments; Laying The Cables - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

Working basis

3

3.1 Order of the adjustments

Order
The setting positions for the machine are interdependent.
Always comply with the order of individual adjustment steps as specified.
It is absolutely essential that you follow all notices regarding prerequisites
and subsequent settings that are marked with

3.2 Laying the cables

To lay the cables:
1. Lay any excess cables neatly in proper cable snakes.
2. Bind together the cable loops with cable ties.
Important
Tie loops wherever possible to fixed parts.
The cables must be secured firmly.
3. Cut off any overlapping cable ties.
Service Instructions 911-210-10 - 00.0 - 06/2020
Working basis
NOTICE
Property damage may occur!
Risk of machine damage from incorrect order.
It is essential to follow the working order specified in these
instructions.
NOTICE
Property damage may occur!
Excess cables can impair the functioning of moving
machine parts. This impairs the sewing function and can result in
damage.
Lay excess cables as described.
in the margin.
13