Adjusting The Stroke Position - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

Programming

16.13.2 Adjusting the stroke position

To adjust the stroke position:
1. In the menu item
 The following options are displayed:
Service Instructions 911-210-10 - 00.0 - 06/2020
Output elements
No. Meaning
Y1 Foot mode
Y2 Hook cover
Y3 Needle cooling on
Y4 Right clamp
Y5 Left clamp
Y8 Stitch position optimization
Y9 Threading switch lamp on
Y10 Oil level indicator warning light on
Y25 Marking lamp 1 (Z)
Y26 Marking lamp 2 (Z)
Y27 Marking lamp 3 (Z)
Y28 Marking lamp 4 (Z)
Extras
test)
press the
position)
option.
Symbol Meaning
Perform a reference run
Check the movement
Switch between jumping foot and presser foot
Switch over the mode of operation
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine when setting the
stroke position.
Switch off the power to the drives when you wish to
test the freedom of motion of the sewing foot rod.
Service
>
Hublage einstellen (Set stroke
Multitest (Multi
>
117