baltur TBG 45 Manual User Instructions page 19

BURNER X
TBG 45 / 45P 3 ÷31
TBG 60 / 60P 6÷ 34
X= Distance between combustion head and disk; adjust the
distance X following the indications below:
a) slacken screw 1
b) turn screw 2 to position the combustion head 3, referring
to index 4.
c) adjust the distance X between minimum and maximum
according the indications in the table.
IMPORTANT The above adjustments are indicative only;
position the combustion head according
to the characteristics of the combustion
chamber
COMBUSTION HEAD ADJUSTMENT SCHEME
Value indicated by
index 4
0 ÷ 3,2
0 ÷ 3,2
INSERTION AND DISINSERTION
LEVER MOTOR CONNECTION
CAMSHAFT
I
II
III
IV
TO MODIFY THE REGULATION OF THE CAMS UTILIZED,
OPERATE THE RESPECTIVE RINGS (I - II - III - IV). THE INDEX
OF THE RING INDICATE ON THE RESPECTIVE REFERENCE
SCALE THE ROTATION ANGLE TAKEN UP FOR EACH CAM.
17 / 26
0006081362_201403
CAMS REGULATION SERVOMOTOR
SQN72.XA4A20 FOR TBG ...P
ADJUSTABLE CAMS
REFERENCE SCALE
2nd FLAME AIR ADJUSTING CAM (80°)
TOTAL AIR CLOSURE (BURNER AT STANDSTILL (0°)
1st FLAME AIR ADJUSTING CAM (20°)
2nd FLAME VALVE ACTUATING CAM (40°)
POSITION
INDICATOR