Table of Contents
Advertisement
4.3.3
Password Settings
For security, the ADAM-3600-C2G has a default password "00000000", and iRTU Studio also
sets it as the default password for RTU devices.
To change the password, follow the steps below:
1.
iRTU Studio connects with the RTU device, and it has been identified.
2.
Click 'password setting', select the device, input the old and new password
respectively and then confirm the new password.
3.
Back to the General Information of the RTU device, edit 'password' to ensure it
fit the new password. Please note the "Project download" will not work if the
password does not match.
ADAM-3600 Series User Manual
Figure 4.36 Password Information
Figure 4.37 Password Settings
44
Advertisement
Table of Contents
