Advantech ADAM-3600-C2G Series User Manual page 50


RUN Indicators Configuration
ADAM-3600-C2G has two functions: data acquisition and control. When users only need data
acquisition, just select "Data Collection" button. RUN indicator will blink if data acquisition
function is normal. When users need data acquisition and control function, select "Data Col-
lection + Softlogic". RUN indicator will blink if both functions are normal. Otherwise, any func-
tion is abnormal, the RUN indicator won't blink.

PROG Indicator Configuration
PROG indicator is for users programming, so in the initial condition PROG is not selected.
When users want a LED indicator to display the signal of wireless communication connection,
PROG indicator can be applied. The wireless signal includes GPRS/3G/4G signal and Wi-Fi
signal. Users can select depends on different requirements. Long light means the signal is
good, blinking means the signal is normal, and off means the signal is bad.

ERROR Indicator Configuration
Users can also enable ERROR indicator to ensure the correctness of data recording and
communication connection for ADAM-3600-C2G. When ERROR indicator blinks, it means at
least one module among data recording, GPRS/3G/4G connection and Wi-Fi connection is
wrong. The enabling of ERROR indicator can indicate important information and help users
monitor the system.
4.3 Project Deployment
This section will introduce the steps to download the configured project to the related RTU
devices. Users can one click to download the project to many RTU devices through the
NodeID identification.
ADAM-3600 Series User Manual 42