Table of Contents
Advertisement
While configuring the expansion module, please click to select the target expansion slot first
and select the module from the draw down list. Then configure the related setting by click and
select from the related column, please refer to the figure below:
Click the button "Calibration" to execute the calibration function for the analogue input chan-
nel on board. User has to provide the precious source for the zero and span calibration. User
only need to calibrate the channel 0, the related parameter will apply to all other channels
automatically. Please follow the instruction to finish the calibration.
Note!
The analogue I/O is default well calibrated and we do not recommend
user do the calibration by one-self. Once the calibration is needed, we
suggest sending back to RMA for calibration service.
Figure 4.27 On-board I/O Settings
Figure 4.28 Expansion I/O Settings
39
ADAM-3600 Series User Manual
Advertisement
Table of Contents
