Advantech ADAM-3600-C2G Series User Manual page 51

4.3.1 Device Identification
Before we start to download the configuration to the RTU device, users have to adjust the
connected RTUs to be with the correct NodeID as project required.
The "Device Search" will help user to explore all the RTU devices which the NodeID is men-
tioned in the configured project. After the search, utility will feedback the IP address of the
RTUs and show the status as "on-line". If the NodeID setting is incorrect or the device is actu-
ally not in the network, the status will show "off-line"
Figure 4.34 Identification for Connected RTU Devices
4.3.2 Project Download
While all the RTU devices are no-line, click "Project Download" to download the project into
the RTU devices. If users click and active the project node on the left-hand-side tree view and
click the "Project Download", user can download the whole project to all the devices on line by
one click. If users only click and activate one target device on the tree view, the "Project
Download" will only download the project to the selected device.
Figure 4.35 Project Download
43 ADAM-3600 Series User Manual