Table of Contents
Advertisement
Status information about each dry contact and the buzzer:
: Dry contact connecting pins 1 and 2
: Dry contact connecting pins 1 and 3
: buzzer deactivated
: buzzzer activated
>Contact number:
configuration.
Operation mode:
•
Normal:
alert on the device that has been configured, it connects terminals 1 and 2.
•
Reverse:
configured, it connects terminals 1 and 3, if none of the alerts configured occurs, it
connects terminals 1 and 2.
•
Multiple:
alarms that have been configured, it connects terminals 1 and 2.
Configurable alerts:
• System working
• Mains failure
• ....
8.2.3.3. Auxiliary inputs
The LPS24 device has four auxiliary inputs. Use this screen to check their status (top)
and configure their behaviour (bottom). Once the auxiliary input is selected
Number"), the activation logic can be selected and then the action associated with that
input. For further information about the auxiliary inputs see
Overview
Status information about each auxiliary input:
Input status
Action status
No associated action
With associated action
>Input number:
its configuration.
Activation:
or short circuit).
26
LPS24 – USER MANUAL
Select (with < and >) the contact number to edit or view its
Operating behaviour of dry contact.
in standby, the contact connects terminals 1 and 3 and in the presence of an
in standby or in the presence of an alert on the device that has been
in standby, the contact connects terminals 1 and 3 and in the presence of all
OK Main menu
>
AUXILIARY INPUTS
✔ closed
> Input number: 1
*Activation:
*Action:
System
Not run
select (with < and >) the number of the auxiliary input to edit or view
defines how the auxiliary input should be to run the configured action (open
Config
OK
AuxIn
X
open
no config
open circuit
Remote mains fail
Dry C.
AuxIn
Gatew
Open circuit
Run
www.daisalux.com
6.3.3
OK
Closed circuit
Not run
Run
("Input
Advertisement
Table of Contents
