LPS24 – USER MANUAL
6.3.5. Input 0...10V
The device has an input that enables brightness control (dimming) of one or more
outputs configured as "beacons". With this feature, the brightness of each circuit
configured as "beacons" can be changed between 10-90% of the nominal.
The dimming can be performed through the display by selecting the percentage desired
by circuit or by this 0..10V input, which is controlled by an analogue signal from 0 to 10V
or potentiometer (30KΩ), the latter is not linear.
Regulation by analogue signal
Regulation by potentiometer
6.3.6. Remote control (TELEM)
The device has a remote input for connecting a Daisalux remote control. This input
provides a remote control for the device so that it can be restarted when in standby or
set to standby when there is a power failure at its input.
www.daisalux.com
17