Table of Contents
Advertisement
8.2.3. Config
8.2.3.1. System
Overview
Language:
Select the display language
(English/Spanish/French/German/Italian/Portuguese)
Date:
Set the date on the device
Time:
Set the time on the device
Duration:
Set the unit's nominal duration. This value is taken as a reference when
obtaining a result of the duration test. It offers a choice of
120 min / 180 min / 360 min / 480 min
Summer time:
Configure the device to automatically change to daylight saving time:
•
Disable:
no change of daylight saving time
•
European:
change to daylight saving time on the last Sunday of March and back to
winter time on the last Sunday in October
•
Other:
change to daylight saving time according to additional configuration (use the
WinCB software to configure this schedule).
•
Code:
Enables changing the password or access PIN.
8.2.3.2. Dry contacts
The LPS24 device has four dry contacts and an alarm. Use this screen to check their
status and configure their behaviour. Once the contact number is selected, its function
and the alarms they can activate or deactivate can be defined so that they activate the
dry contact or buzzer. For further information about dry contacts and the alerts available
see section
6.3.4
Overview
OK Main menu
LPS24 – USER MANUAL
Main menu
Config
SYSTEM CONFIG
*Language:
*Date:
*Time:
*Duration:
*Summer time:
*Code:
System
Dry C.
AuxIn
>
Config
DRY CONTACTS
>Contact number:
*Operation mode:
*System working
*Mains failure
System
Dry C.
AuxIn
www.daisalux.com
English
07/02/13
22:31
60 min
European
****
Gatew
30 min / 60 min / 90 min /
OK
Dry C
OK
1
normal
✔
Gatew
25
Advertisement
Table of Contents
