General Information; Construction - flowair slim Series Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

2. GENERAL INFORMATION

SLIM air curtain is a high-quality device that, by creating an air barrier, reduces heat exchange losses. The device is dedicated ONLY for
indoor use. The Slim air curtain is intended for horizontal installation above a door opening or vertical installation with a door opening with
a maximum height of 3.2 m.
The air curtain is available in a cold/ambient version (without heating), with electric heaters or with a water exchanger:
SLIM E-100; SLIM E-150; SLIM E-200 – air curtains with electric heaters with a maximum range of 3.2 m *;
SLIM W-100; SLIM W-150; SLIM W-200 – air curtains with a water heat exchanger with a maximum range of 3,2 m *;
SLIM N-100; SLIM N-150; SLIM N-200 - air curtains without water exchanger max. Stream range 3.2 m *.
* according to ISO 27327-1
❶ inlet
❷ outlet
PIC. 2.1 DIRECTION OF AIR FLOW.
ADVICE
1. The use of a heated air curtain (W or E) is recommended for public buildings .
2. Underpressure in the building significantly reduces the efficiency of the air barrier, the ventilation system should be balanced.
3. At a wind speed of more than 3 m / s, the heated version of air curtain should be used to increase user comfort.

3. CONSTRUCTION

PIC. 3.1 CONSTRUCTION SLIM E.
1.
Engine
2.
Right rotor
3.
Left rotor
4.
Electric heater
5.
Top cover *
6.
Bottom cover *
7.
Outlet grille
8.
Front strip *
9.
Side cover *
10. Side cover *
11. Motion sensor
12. Mounting bracket (optional element)
13. Contactor
* Casing components made of powder coated steel in RAL 9003 and RAL 9005 color configuration
4
PIC. 2.2 AIR STREAM RANGE FOR DIFFERENT FAN STEPS.
PIC. 3.2 CONSTRUCTION SLIM N/W.
1.
Engine
2.
Right rotor
3.
Left rotor
4.
Electric heater
5.
Top cover *
6.
Bottom cover *
7.
Outlet grille
8.
Front strip *
9.
Side cover *
10. Side cover *
11. Motion sensor
12. Mounting bracket (optional element)

Advertisement

Table of Contents
loading

Table of Contents