Technical Documentation: En; Important Information - flowair slim Series Instruction Manual

TECHNICAL DOCUMENTATION:

1. IMPORTANT INFORMATION

We have made every effort to make this manual as easy to understand as possible. However, if you have any difficulties, problems
or questions, please contact FLOWAIR support at: info@flowair.pl
Also visit our website www.flowair.pl where you will find mounting tips.
In this manual you will find important safety information and tips marked as below:
WARNING
•
Dangerous practices which may
result in serious injury or death.
Read all warnings before
starting work.
IMPORTANT SAFETY INFORMATION:
1. Before installing, connecting, starting up, using and maintaining the device, please read this manual
completely.
2. After receiving the product, check that it has not been damaged during transport. If the product appears to be
damaged, DO NOT START TO MOUNT THE DEVICE; instead, you must immediately report the damage to the
carrier.
3. The device must be mounted in a stable way and in accordance with the instructions, in a place that can be
easily accessed, thus ensuring the possibility of carrying out repairs and routine maintenance, as well as allowing
easy and safe disassembly of the device.
4. The stability and durability of installation of the device depends on the structure of the building (in particular
ADVICE
walls and ceilings). The person performing the assembly should take these conditions into account when
mounting the device.
5. The technical documentation should be kept in a safe place, easily accessible to the user and service
technician.
6. The nameplate is located next the cable glands on the top of the device.
7. Always test the operation of the device after installation.
1. The power connection shall be performed only by an authorized person.
2. The device may start automatically (when motion is detected in the sensor area).
3. The device is not equipped with a thermostat that controls the room temperature. Do not use the device in
small rooms where there are people who are not able to leave the premises alone. Above mentioned does not
apply to rooms with constant supervision.
4. The device requires periodic inspections in accordance with the instructions in this manual.
5. Do not hang/put pressure on the device.
6. Do not place any objects on the device or hang anything on the connection stubs.
7. The product should be stored and assembled out of the reach of small children.
8. The device is dedicated to work indoors with a maximum air dustiness of 0.3 g / m
CAUTION
made of aluminum, copper and galvanized steel and cannot be used in an corrosive environment.
9. Equipment cannot be used in an environment where oil mist is present.
10. This equipment may be used by children that are at least 8 years old, by persons with reduced physical and
mental abilities and persons with no experience and knowledge of the equipment, on condition that the
supervision or instruction regarding correct use of the equipment in a safe manner is provided and the possible
threats are understood. The device cannot be used by children to play. Unattended children should not clean or
maintain the equipment.
11. The device in electric version (SLIM E) may give off a smell of burning dust at first start up or if it is starting
after a long standstill.
1. The device is powered by dangerous voltage. Always disconnect the device from the power supply before
servicing or accessing its internal components.
2. Do not insert your fingers or any objects inside the device.
WARNING
3. Do not cover the device.
CAUTION
•
unsafe practices which, if not
avoided, may result in damage
to property or minor injuries.
Before starting work, read all
cautions.
ADVICE
•
Useful tips for the user and
installer.
3 . The device has elements
EN
3