7 Service options
7.1 Temperature test
58
7
Service options
Temperature test
7.1
The temperature test is used to check the correct temperature for the
furnace and is initiated by Customer Service in exceptional cases. The
temperature test is only carried out on the instructions of the Customer
Service Center.
Calibration
7.2
Each unit leaves production with its own individual calibration that is
saved on the primary unit. Calibration is reserved for the service
engineer and is only carried out in rare cases, such as when replacing
particular spare parts.
Dentsply Sirona
Operating Instructions CEREC SpeedFire
65 71 165 D3639
D3639.201.01.08.02 01.2020