Table of Contents
Advertisement
JRR200 Route Reflector Physical Specifications
JRR200 Route Reflector Cooling System
Copyright © 2018, Juniper Networks, Inc.
Table 7: JRR200 Route Reflector Rear Panel Components (continued)
Number
Component
3
Alarm Off button
4
ESD point
5
Fan trays
6
Power supply
The JRR200 Route Reflector chassis is a rigid sheet metal structure that houses all the
components.
Table 8 on page 21
Table 8: Physical Specifications of the JRR200 Route Reflector Chassis
Description
Value
Chassis height
1.75 in. (4.45 cm)
Chassis width
17.48 in. (44.40 cm)
Chassis depth
25 in. (63.50 cm)
Weight
JRR200 route reflector with 2 AC power supplies: 29 lb (13.16 kg)
JRR200 route reflector with 2 DC power supplies: 28.8 lb (13.06 kg)
You can mount the JRR200 route reflector on a standard 19-in. four-post rack or in a
standard 19-in. enclosed cabinet.
JRR200 Route Reflector Air Flow and Cooling System on page 22
Description
Use this button to turn off an alarm triggered because of an
abnormal DC output voltage caused by any of the following:
Only one power supply unit is plugged in.
The AC power cord is not plugged in.
The power supply unit is not functional and there is no DC
output.
For personal safety, while working on the JRR200 route reflector,
use the ESD outlet to plug in an ESD grounding strap to prevent
your body from sending static charges to the route reflector.
Four fan trays for cooling the JRR200 route reflector and its
components. Each fan tray contains two fans.
Three fan trays are required for proper air flow across the chassis
internal components. The fourth fan tray provides redundancy.
Two power supply slots. Each power supply contains a power
cord outlet. Two 650-W DC or AC power supplies are provided
with the JRR200 route reflector.
lists the physical specifications of the chassis.
Chapter 1: Overview
21
Advertisement
Table of Contents
Troubleshooting
